Rubber Anti-Vibration Mounts
Male-male, female-female and male-female rubber mounts, quoted on diameter, height, thread, rubber hardness and load. Load is the field that decides whether the mount works, and it is exactly the field that cannot be guessed from a photo.
Also searched as: rubber vibration mount, anti vibration isolator, m8 rubber bobbin, machine foot mount
Send a drawing, a sample or an OE number and we quote this part type to it. The selection data below is what the quote is built from.
What decides the price
In order of impactA mount is chosen for the load it carries at the vibration frequency involved. Four mounts on a machine do not each carry a quarter of the weight if the machine is unbalanced.
Shore hardness sets deflection under load. A harder mount deflects less and transmits more at low frequency.
Male-male, female-female and male-female are three different mountings. The thread size alone does not tell you which one is on the drawing.
Worth checking before you order
An M8 mount carries anything from a few kilos to well over what the rubber can take. Load has to be stated.
Pre-load changes the stiffness and the isolation with it. Shims are for alignment, not mount compression.
Selection data
Confirmed per orderQuoted to your specification
Send a drawing or a samplePart numbers for this subcategory are quoted to order. Send the size, grade and finish you need, or a drawing, and we quote against that.
Questions
Can you quote a load rating?+
Only from the factory's data. Load and hardness are published together or not at all.
Do you supply the matching washers and nuts?+
Quoted with the mount. The joint is only as good as what holds it.
Send the specification, not the product name.
Grade, size, thread standard and coating are what a quote is built from. A product name alone produces a price that changes twice before the order.